EFFECT OF DIFFERENT GEOMETRIC PARAMETERS OF BLADELESS FAN ON ITS PERFORMANCE
Bladeless fan are able to generate smooth and steady wind compared to conventional fans. However, the design of the bladeless fan is open to further studies and improvements. In this work, analysis using simulation of bladeless fan design parameters was done. The bladeless fan geometry are designed in terms of blade length, blade angle and outlet slit thickness. The bladeless fan is design using SolidWorks and ANSYS is used for the flow simulation. The design of the fan in done in 2-dimensionally. The boundary condition in simulation includes the velocity inlet, pressure outlet and wall. Two inlet velocity are set, which is 2m/s and 60m/s. The result obtained is expressed in the air flow multiplier factor. From the result obtained, the parameters which has most effect on the outlet airflow are the outlet thickness, followed by blade length and blade angle.
How to Cite
Copyright (c) 2023 Journal of Engineering and Technology (JET)
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Thank you for your interest in submitting your manuscript to the Journal of Engineering and Technology (JET).
JET publishes only original works. Manuscripts must not be previously published or under consideration by any other publications. Papers published in JET may not be published again in whole or in part without permission. Please review these guidelines for researching, writing, formatting and submitting your manuscript. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International (CC BY-NC-ND 4.0).
Those submitting manuscripts should be carefully checked to ensure that all works contributed to the manuscript are acknowledged. The list of authors should include all those who can legitimately claim authorship. Manuscript should only be submitted for consideration once consent is given by all contributing authors using Transfer of Copyright form.