MECHANICAL PERFORMANCE AND SHAPE MEMORY BEHAVIOR OF 4D PRINTING POLYLACTIC ACID/BIOBASED THERMOPLASTIC POLYURETHANE

Authors

  • F. N. Mohd Nazeri Department of Manufacturing and Materials Engineering, Kulliyyah of Engineering, International Islamic University Malaysia, Jalan Gombak, 53100 Kuala Lumpur, Malaysia.
  • H. A. A. Jalil Department of Manufacturing and Materials Engineering, Kulliyyah of Engineering, International Islamic University Malaysia, Jalan Gombak, 53100 Kuala Lumpur, Malaysia.
  • H. Anuar Department of Manufacturing and Materials Engineering, Kulliyyah of Engineering, International Islamic University Malaysia, Jalan Gombak, 53100 Kuala Lumpur, Malaysia.
  • M. R. Manshor Department of Manufacturing and Materials Engineering, Kulliyyah of Engineering, International Islamic University Malaysia, Jalan Gombak, 53100 Kuala Lumpur, Malaysia.

DOI:

https://doi.org/10.54554/jet.2025.16.2.011

Keywords:

3D Printing, 4D Printing, Bio-Based Thermoplastic Polyurethane, Polymer Blend, Polylactic Acid

Abstract


Shape memory materials (SMMs) possess the unique ability to return to their original shape after deformation when exposed to external stimuli, making them highly desirable for applications such as biomedical devices and smart textiles. This study investigates the enhancement of polylactic acid (PLA) by incorporating bio-based thermoplastic polyurethane (bTPU) to improve flexibility and shape recovery. PLA/bTPU blends were prepared at varying weight ratios and characterized for mechanical properties, morphology, and shape memory behavior. Results showed that elongation at break increased dramatically from 7.66% in neat PLA to 944.14% in PLA60, indicating a substantial improvement in ductility. Although tensile strength decreased from 43.26MPa (PLA) to 21.80MPa (PLA60), this trade-off was balanced by enhanced flexibility. Morphological analysis revealed a transition from brittle fracture in PLA to ductile, phase-separated “sea-island” morphology in PLA60, with continuous bTPU domains promoting energy dissipation. FTIR analysis confirmed the presence of functional groups associated with PLA and bTPU without new peak formation, indicating physical blending rather than chemical interaction. Shape recovery tests revealed that recovery improved from 48.25% in PLA to 81.48% in PLA60 under thermal stimulation at 85°C. These results suggest that PLA/bTPU blends offer improved mechanical resilience, elasticity, and shape memory behavior, making them suitable for sustainable 3D and 4D printing applications in fields requiring adaptable material performance. This research contributes to sustainable material engineering and supports the development of adaptable materials for aerospace, automotive, and bioengineering applications.

Downloads

Download data is not yet available.

Downloads

Published

2025-12-30

How to Cite

Mohd Nazeri, F. N. M. N., Jalil, H. A. A. J., Anuar, H. A., & Manshor, M. R. M. (2025). MECHANICAL PERFORMANCE AND SHAPE MEMORY BEHAVIOR OF 4D PRINTING POLYLACTIC ACID/BIOBASED THERMOPLASTIC POLYURETHANE. Journal of Engineering and Technology (JET), 16(2). https://doi.org/10.54554/jet.2025.16.2.011

Issue

Vol. 16 No. 2 (2025): JOURNAL OF ENGINEERING AND TECHNOLOGY (INPRESS)

Section

Articles

License

Copyright (c) 2025 Journal of Engineering and Technology (JET)

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Thank you for your interest in submitting your manuscript to the Journal of Engineering and Technology (JET).

JET publishes only original works. Manuscripts must not be previously published or under consideration by any other publications. Papers published in JET may not be published again in whole or in part without permission. Please review these guidelines for researching, writing, formatting and submitting your manuscript. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International (CC BY-NC-ND 4.0).

Those submitting manuscripts should be carefully checked to ensure that all works contributed to the manuscript are acknowledged. The list of authors should include all those who can legitimately claim authorship. Manuscript should only be submitted for consideration once consent is given by all contributing authors using Transfer of Copyright form.