MARTIBO: SMART TISSUE DISPENSER WITH MONITORING DASHBOARD

Authors

  • I. M. Alfaniza Department of Electrical Engineering, Faculty of Industrial Technology, Universitas Islam Indonesia, Jl. Kaliurang KM 14,5 Yogyakarta, Indonesia.
  • M. Syafiq Department of Electrical Engineering, Faculty of Industrial Technology, Universitas Islam Indonesia, Jl. Kaliurang KM 14,5 Yogyakarta, Indonesia.
  • D. A. R. Wati Department of Electrical Engineering, Faculty of Industrial Technology, Universitas Islam Indonesia, Jl. Kaliurang KM 14,5 Yogyakarta, Indonesia.
  • H. N. P. Wisudawan Department of Electrical Engineering, Faculty of Industrial Technology, Universitas Islam Indonesia, Jl. Kaliurang KM 14,5 Yogyakarta, Indonesia.
  • E. S. L. Ming Faculty of Electrical Engineering, Universiti Teknologi Malaysia, 81310, Johor Bahru, Johor, Malaysia.
  • M. B. M. Addi Faculty of Electrical Engineering, Universiti Teknologi Malaysia, 81310, Johor Bahru, Johor, Malaysia.

DOI:

https://doi.org/10.54554/jet.2025.16.2.017

Keywords:

Dispenser, Hygiene, Internet of Things, Monitoring

Abstract


Martibo is a smart tissue dispenser leveraging IoT technology to enhance hygiene and optimize facial tissue usage. It features a proximity sensor for touchless dispensing, a load cell sensor for monitoring tissue stock, and a voltage sensor for battery tracking. Data processed by an ESP32 microcontroller is displayed on an LCD screen and transmitted via a smartphone application, enabling real-time notifications. With an average tissue stock detection error of 0.11%, an average voltage measurement error of 1.2% and a notification response time of 1.2s. Martibo ensures hygiene, prevents stock shortages, and improves convenience.

Downloads

Download data is not yet available.

Downloads

Published

2025-12-19

How to Cite

Muhammad Alfaniza, I., Syafiq, M., Ana Ratna Wati, D., Nur Prasetyo Wisudawan, H., Su Lee Ming, E., & Binti Mohd Addi , M. (2025). MARTIBO: SMART TISSUE DISPENSER WITH MONITORING DASHBOARD. Journal of Engineering and Technology (JET), 16(2). https://doi.org/10.54554/jet.2025.16.2.017

Issue

Vol. 16 No. 2 (2025): JOURNAL OF ENGINEERING AND TECHNOLOGY (INPRESS)

Section

Articles

License

Copyright (c) 2025 Journal of Engineering and Technology (JET)

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Thank you for your interest in submitting your manuscript to the Journal of Engineering and Technology (JET).

JET publishes only original works. Manuscripts must not be previously published or under consideration by any other publications. Papers published in JET may not be published again in whole or in part without permission. Please review these guidelines for researching, writing, formatting and submitting your manuscript. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International (CC BY-NC-ND 4.0).

Those submitting manuscripts should be carefully checked to ensure that all works contributed to the manuscript are acknowledged. The list of authors should include all those who can legitimately claim authorship. Manuscript should only be submitted for consideration once consent is given by all contributing authors using Transfer of Copyright form.